Heat Preservating Hopper Dryer

Features

-Elegant appearance, smooth surface
-special"down-blowing" designed to distribute heat ever,avoiding drying plastic granule's two times moisture absorption, greating drying ablity.
-Openable windown for view and inspection, excellent airtight and it is easy for cleaning materials
-Equipment with microcomputer controller which can reduce accident caused by men's wrong operation or mechanical error
-1-week auto start-stop timer function for saving energy
-All models offer aluminium bottom, feet suction box, hot-air recycling system, and air filter for options.

Main Technical Data

型号Type	装料量 (L)Hopper capacity	干燥电热 (kw)Heater power	风机 (w)Blower power	外型尺寸 (mm)External size	脚架尺寸 (mm)Specifceation	整体高度 (mm)Height (external size)	重量 (Kg)Weight
XHD-40U	40	3	120	760×640×390	790×450×660	1295	25
XHD-80U	80	3.9	120	940×722×475	840×552×722	1465	50
XHD-120U	120	3.9	120	1210×722×475	840×552×722	1735	60
XHD-160U	160	6	180	1225×822×575	920×652×795	1825	90
XHD-230U	230	6	180	1505×822×575	920×652×795	2105	100
XHD-300U	300	12	250	1450×945×695	970×790×930	2085	130
XHD-450U	450	12	250	1850×945×695	970×790×930	2435	160
XHD-600U	600	18	550	1820×1170×915	1130×1000×1200	2470	200
XHD-750U	750	18	550	2100×1170×915	1320×1000×1200	2780	220
XHD-900U	900	18	550	2070×1340×1050	1320×1200×1200	2730	250
XHD-1200U	1200	18	550	2500×1340×1050	1320×1200×1200	3160	376
注：产品规格若有变化，恕不另行通知。Note: We reserve the right to make some changes of products specifications without notic

XD Dehumidifying Drying and feeding unit(three in one)

Features

-XD dehumidifying, drying and feeding unit equipped honeycomb dehumidifier;

-Used for high hygroscopic engineering plastic and rubber such as PA, PC, PBT, PET. etc. , H4 and H5 Types of can be selected according customers' demand;

-Integrates dehumidifying, drying and two-step feeding function , the three-step feeding is available ;

-The dew-point monitor indicator for customer selection, which can monitor the dew-point;

-The moistureproof drying material tube adopt bottom blowing design with circling air exhausting device, prevent heat energy emitting, keep temperature, improve drying effiency;

-Compact in size for easy moving and the machine can be replace easily;

-Airtight loop feeding system, prevent the dried raw material to be re-moisture by contact external air;

-With built-in restrictive valve , guarantee no remained material in pipe;

-Use two cooler in dehumidifying system, guarantee low temperature on air and dew-point.

Main Technical Data

XD-Type	80u/ 90H	120u/ 90H	160u/ 120H	230u/ 150H	300u/ 200H	450u/ 300H	600u/ 400H	750u/ 500H	900u/ 700H
Drying system
(L) Moisture proof bottom capacity	80	120	160	230	300	450	600	750	900
(kw) Dry heater power	3.9	6	6	7.2	12	15	18	21	24
(kw) Dry blow power	0.4	0.75	1.5	1.9	1.9	2.6	3.4	5.5	5.5
Dehumidifying system
(m/hr) Damp proof air	90	90	120	150	200	300	400	500	700
(kw) Regen heater power	2.8	3.5	3.5	4	5.4	7.2	7.2	10	10
(kw) Regen blow power	0.2	0.2	0.2	0.4	0.4	0.75	0.75	1.9	1.9
Loading system
(kw) Loader blow power	0.75	0.75	0.75	1.9	1.9	1.9	1.9	1.9	2.2
(inch) Suction pipe	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	2
(L) Photo electric hopper	6	6	6	6	6	6	6	6	12
(L) Standard hopper	6	6	6	12	12	12	12	12	12
(mm)External size	L	1200	1200	1300	1300	1400	1700	1700	2100
	W	1000	1000	1100	1200	1300	1400	1400	1500
	H	1850	1850	1850	1850	1900	2300	2300	2700
(kg) Weight	330	376	395	435	570	600	700	750	850
Note: We reserve the right to make some changes of products specifications without notice.

With high efficiency , XD series honeycomb rotation cylinder dehumidifier is mainly used for dehumidifying operation on engineering plastic of strong hygroscopic property .The body consists of ceramic honeycombs made of ceramic fiber and organic additive, and molecular sieve and silicon glue as basic material crystal sintered by high temperature with surface hard force to be attracted in the inner of honeycombs. So unlikely as general cylinder-type or rotation tray type the powder particles produced by molecular nodes aging to be blown into the drying tube to pollute the plastic, and furthermore its endless using life and washable is unlikely as general molecular bodes to be aging and saturated should be replaced often. The water content will be sucked immediately when the moisture return wind through pass the numerous micro holes of cylinder honeycombs. So they have been dehumidified completely and have been the full dried wind with very low dew point. The principle of re-producing and dehumidification are same and carry out simultaneously. only the reproduced wind blowing has reverse direction.

XD Honeycle Cylinder Dehumidification Dryer

Features

-The display screen shows re-producing temperature setting and actual temperature;
-The dew point of dried wind hit -50℃ degree;
-main power switch with mechanical interlock function;
-The dehumidification system adopts double cooler structure, can guarantee very low return wind temperature and dew point.

Humidity and water content rate check list

Dew point	Relative Humidify	Moisture Content
		PPM	%
20	100	23.072	2.307
10	52.5	12.117	1.212
0	26.1	6.027	0.603
-10	11.2	2.574	0.257
-20	4.4	1.025	0.103
-30	1.6	378	0.038
-40	0.6	128	0.013
-50	0.2	39	0.004

原料Raw Material	干燥温度(℃) Drying Temperature	干燥时间(hr) Drying Time	比热(j/kg.℃) Specific Heat	原料比重(kg/dm3) Material Proportion	除湿前含水率(%) Water Ratio Before Dehumidifing	除湿后含水率(%) Water Ratio After Dehumidifing	干燥能力(kg/hr)
							XD-90H	XD-120H	XD-150H	XD-200H	XD-300H	XD-400H	XD-500H	XD-700H
ABS	80	2--3	0.34	0.6	0.3	0.02	27	35	71	105	180	210	285	355
CA	75	2--3	0.5	0.5	1	0.02	22	30	60	90	150	180	235	295
CAB	75	2--3	0.5	0.5	0.8	0.02	22	30	60	90	150	180	235	295
CP	75	2--3	0.6	0.6	1	0.02	27	35	71	106	180	210	285	355
LCP	150	4	0.6	0.6	0.04	0.02	20	27	55	80	135	160	210	265
POM	100	2	0.35	0.6	0.2	0.02	40	53	105	160	265	320	425	530
PMMA	80	3	0.35	0.65	0.5	0.02	29	38	77	115	192	230	307	383
ILNOMER	90	3--4	0.55	0.5	0.1	0.04	17	22	44	66	111	133	177	220
PA6/6.6/6.10	75	4--6	0.4	0.65	1	0.05	14	19	38	58	96	115	153	192
PA11	75	4--5	0.58	0.65	1	0.05	17	23	46	69	115	138	184	230
PA12	75	4--5	0.28	0.65	1	0.05	17	23	46	69	115	138	184	230
PC	120	2--3	0.28	0.7	0.3	0.01	31	41	83	124	206	250	330	413
PU	90	2--3	0.45	0.65	0.3	0.02	29	38	77	115	190	230	307	383
PBT	130	3--4	0.3-0.5	0.7	0.2	0.02	23	31	62	93	155	186	248	310
PE	90	1	0.55	0.6	0.01	＜0.01	80	106	212	318	531	637	850	1062
PEI	150	3--4	0.6	0.6	0.25	0.02	20	27	53	80	133	160	212	265
PET	160	4--6	0.3-0.5	0.85	0.2	0.02	19	25	50	75	125	150	200	250
PETG	70	3--4	0.6	0.6	0.5	0.02	20	27	53	80	133	160	212	265
PEN	170	5	0.85	0.85	0.1	0.05	23	30	60	90	150	180	240	300
PES	150	4	0.7	0.7	0.8	0.02	23	30	60	90	150	180	240	300
PMMA	80	3	0.65	0.65	0.5	0.02	29	38	77	115	190	230	310	385
PPO	110	1--2	0.4	0.5	0.1	0.04	33	44	88	133	220	265	355	440
PPS	150	3--4	0.6	0.6	0.1	0.02	20	27	53	80	133	160	212	265
PI	120	2	0.27	0.6	0.4	0.02	40	53	105	160	265	320	425	530
PP	90	1	0.46	0.5	0.1	0.02	66	88	180	265	442	530	710	885
PS (GP)	80	1	0.28	0.5	0.1	0.02	66	88	180	265	442	531	708	885
PSU	120	3--4	0.31	0.65	0.3	0.02	22	29	60	85	145	173	230	290
PVC	70	1--2	0.2	0.5	0.1	0.02	33	44	90	135	220	265	355	442
SAN (AS)	80	1--2	0.32	0.5	0.1	0.05	33	44	90	135	220	265	355	442
TPE	110	3	0.7	0.7	0.1	0.02	30	40	85	125	205	250	330	413

(1)使用独立的干燥料斗。Useing indenpendent dry hopper
(2)在20℃的大气温度及65%的相对温度下，干燥后其水份含量低于0.005%。Under the 20℃ atmospheric temperatures and 65% relatively temperatures, the water containing less than 0.005% after dryin(1)使用独立的干燥料斗。Useing indenpendent dry hopper
(2)在20℃的大气温度及65%的相对温度下，干燥后其水份含量低于0.005%。Under the 20℃ atmospheric temperatures and 65% relatively temperatures, the water containing less than 0.005% after dryin

XDL Drying and feeding unit(two in one)

Features

-Integrates drying and auto-feeding functions, and two machine in one design;
-Mircocomputer control system, control machine running automatically ( with timingswitch and full-functional alarming system);
-Hot-air recycling system, save power consumption up to 40% and environment-friendly without hot-air and dust exhausting.
-Compact in size for easy moving and the machine can be replace easily;
-With built-in restrictive valve, guarantee no remained material in pipe.

Main Technical Data

型号 Type	XDL-50	XDL-100	XDL-200	XDL-400
配置 Provide with
干燥机干燥电热功率 (kw) Heater power of dryer	3.9	6	12	18
送料风机功率 (kw) Drying blower power	1.5	2.2	2.2	2.2
干燥风机功率(kw) Drying blower power	0.2	0.25	0.4	0.4
外型尺寸(mm) External size	1100×750×1500	1200×900×1700	1500×1000×1700	1500×1100×1800
重量 (kg) Weight	110	210	300	400
注：产品规格若有变化，恕不另行通知。Note: We reserve the right to make some changes of products specifications without notice.