PET Preform Mould Series
-Electric control system with simulating stretch testing to improve yield rate.
-Adopt advanced teahnique to make each cavity self-lock,and ensure mold concentricity(tolerance less than 0.08mm).
-The materials of coreand cavity are made of mirror corrosion resistance plastic mold steel imported from Sweden and Germany.
-International standard screw neck,imported nitrided steelwith high hardness and long life time.
-Advanced hot runner system with point control system,ensure uniform heating,which brings high-quality preforms.
-Exceptional cooling system brings high efficiency.
-Valvea gate strcuture without manual cut tail,reduce the lador force. -At least 3 million times life-time guarantee.
96-Cavity Preform Mould
-Hot runner employs PID controling system which features automatic compensation and automatic protection,and contributes to the prolongation of lifetime of electric heater;
-The precision of temperature controlling falling within 1°C,which ensures to avoid plastic in the hot runner being burnt,resulting in ayield of up to 99% an more;
-Ultra nozzles are designed to be maintenance-friendyly.Nozzle tip inserts,heaters,tip insulaor,and thermocouples are easily accessible and can be replaced while the hot runner is mounted in the machine,which minimizes down-time and reduces maintenance cost.
|
 |
 |
72-Cavity Preform Mould
-72 cavity preform mould for the prefrom under 38mm neck size.
-The mold has balanced hot runner system with shut off valve gate,ensure there is no any stringing form on the injection gate of the performs.
-The cam roller design help the operator save the maintenance time of the molds.
-The PET preform mold is designed for HONGZHEN’s injection molding system.
-The weight of the preform such as 20g,cycle time is 18 Sec with general PET screw injection molding machine,It reaches13 Sec with 3 stage post cooling system. |
48-Cavity Preform Mould
24-Cavity Preform Mould
12-Cavity Preform Mould
3-5 gallon preform mould
Cooling System
-Spiral Water Cooling Way on cavity enhances mould cooling.
-Cooling system in neck and move neck plates brings an enhance cooling.
-Precise Distributary Plate distributes cooling water into cavity evenly,quicken preform cooling.
-Hot Runner Balance design ensures evenly force,uniform heating and identical preforms.
-Less energy cost and pressure lost.
-Lndependent cavity control system ensures nozzle temperature fluctuates within＜1℃
-Adopt imported Heating devices,Germany Hotset or Italy Rotfil.
Specification
| Cavities |
17g PET preform |
28g PET preform |
47g PET preform |
| Dimension(mm) |
Weight(kg) |
Dimension(mm) |
Weight(kg) |
Dimension(mm) |
Weight(kg) |
| 2*2 |
345*390*466 |
370 |
345*390*486 |
450 |
345*390*511 |
500 |
| 2*3 |
410*390*466 |
440 |
410*390*486 |
500 |
410*390*511 |
550 |
| 2*4 |
475*390*466 |
510 |
475*390*486 |
600 |
475*390*511 |
660 |
| 2*6 |
605*390*466 |
650 |
605*390*486 |
730 |
605*390*511 |
800 |
| 2*8 |
735*390*466 |
800 |
735*390*486 |
900 |
735*390*511 |
1000 |
| 2*10 |
865*390*466 |
950 |
865*390*486 |
1050 |
865*390*511 |
1150 |
| 3*8 |
775*500*490 |
1250 |
775*500*510 |
2000 |
775*500*535 |
2200 |
| 4*8 |
855*600*520 |
1850 |
855*600*540 |
2000 |
855*600*565 |
2200 |
| 6*8 |
955*720*520 |
2370 |
955*720*540 |
2500 |
955*720*565 |
2700 |
| 7*8 |
1085*720*520 |
2765 |
1085*720*540 |
2950 |
|
|
| 6*12 |
1085*900*550 |
3500 |
1085*900*570 |
3700 |
|
|
Perfectly Balanced Hot Runner
-Hot runner with good balance ensures PET melt material running to each cavity and keep balanced pressure.
-The design of PET runnersensures minimum cutting force and IV lost.
-Reasonable heat distribution ensures stable AA content in all the cavities.
Products
Preform Mould Series
