|
|
|
|
High technology design of the perform mould .All of the moulds are designed as
HUSKY mould .In dividual temperature controller system adopted Japan Omron
components.Off-center for each cavity of the perform mould to be sure less than
0.05mm.
Two directions hot runner design,the injection point for each perform is perfectly.
without any damage for the blowing of the bottle.
Each mould with 3 million shots guarantee, HONGZHEN perform mould is top 3
in china.Annually 3000 cavity production capacity. With maximum 96 cavities
perform mould production ability
|
|
 Off-center adjustment system
Off-center adjustment system can make the error of preform’s wall thickness
less than 0.05mm.
This system does not affect the lifetime of mould |
|
Self-lock System
International advanced bi-awls fixed orientation self-locked structure has been adopted. |
|
Cooling System
On the preform mold’s each inner part,including core,cavity and valve gate
system,there is all specially
designed cooling system with perfect cooling effect
and sbundant strength. |
|
Heating System
Double heating system can ensure that the impact of heating is good and quality
control is credible.
the Heating Band unit makes nozzles be with invariable temperature.
The Heater Unit is used to heat
the hot runner plate with long using life and powerful haating capacity. |
|
Hot Runner System
The preform mould adopts Pin-valve type Hot Runner Systen,such hot runner
system can reducemould’s
each part’s wear&tera and maintenance cost,and
also save 10%~15% electric energy. |
|
Hydraulic Ejectiong System
The preform-doffing success ratio has achieved firm endurance and the whole
preform ejecting process
will become much quieter. |
|
|
ZheJiang HongZhen Machine mould Group Co,.Ltd.All Rights
|
